Is Novel 24-Hour Continuously Active Surface Disinfection the Answer to Environmental Transmission of Healthcare-Associated Infections?

Author: Amanda Thornton, CIC, RN, MSN

Categories: General Infection Prevention & Surface Disinfection July 23, 2021

For about a decade, prior to the pandemic, there was a shift towards the control of healthcare-associated infections (HAIs) through a focus on environmental cleaning, especially in relation to reusable medical equipment. The novel idea of continuous room disinfection was an ongoing topic of discussion among environmental experts and seemed an unattainable pipe dream.

Even with optimal cleaning and disinfecting practices, recontamination of the environment and equipment occurs quickly, especially in healthcare settings (1).  Lots of ideas were bandied about, such as antimicrobial paint, spray systems, novel metal coatings, ongoing light-emitting systems, and so on and so forth. However, nothing seemed to reasonably meet the dream of achieving sustained antimicrobial activity for 24 hours, even when a surface is subsequently touched and used afterward.

With the pandemic onset, transmission prevention efforts became front and center, but trying to obtain PPE and cleaning and disinfection supplies was a major problem for both the healthcare and community settings.  The worldwide demand for supplies far outpaced the production capabilities that existed, and many countries were no longer exporting the critical components that made up many of these products.  If the novel idea of a disinfectant that gave persistent antimicrobial activity on surfaces for 24 hours had been readily available in all settings, would that have made a difference?

A novel 24-hour persistent disinfectant was developed and available on the market at the start of the pandemic, but the technology was so new, and disinfectant supplies were in such high demand, very few could get a hold of the product.  Now that infection prevention products are more readily available, and it seems that Coronavirus may be here to stay, how can this technology help mitigate the risk of transmission of pathogens going forward?

How 24-Hour Continuously Active Surface Disinfection (CAD) Works

First, we must understand what this disinfectant technology actually achieves. This novel CAD is the first and only EPA-registered surface disinfectant with 24 hours of sustained antimicrobial activity.  But how does it work?  The power behind CAD is a multi-layer protective “shield” on the surface. It can be used as a disinfectant providing 24-hour protection, a regular disinfectant, a soft surface sanitizer, and 7-day mildew and fungal preventative that is compatible with most surfaces–making it truly a versatile product for many situations. A multi-layer shield with a proprietary polymer binds the pathogen-fighting ingredient to the surface, even when the surface is subsequently touched and contacted multiple times.

In a paper titled “Antimicrobial activity of a continuously active disinfectant against healthcare pathogens” published in ICHE in 2019, Dr. William Rutala and colleagues evaluated the CAD technology in the healthcare setting and found that the novel disinfectant achieved “significant, sustained antimicrobial activity in 5 minutes against most pathogens after 24 hours of “wear” and reinoculations” (2).  They concluded this technology is poised to be a significant contributor to the reduction of HAIs in the future and propose that “If the microbial load on surfaces is pathogenfree or if pathogens are substantially reduced, the treated surface will not act as a reservoir for pathogens and, thus, will not be linked to disease transmission. Thus, CAD … (and other continuous room decontamination technologies) may reduce or eliminate the problem of recontamination and minimize the role of contaminated environmental surfaces and equipment in the transmission of healthcare pathogens” (2).

It is no secret that the environment plays a role in the transmission of healthcare-associated pathogens via surfaces and the hands of healthcare workers (2). Therefore, having a technology that ensures a surface or piece of equipment does not become re-contaminated will be a game-changer in the world of surface disinfection.

Continuously active disinfectants will also significantly improve the efficiency of staff and healthcare personnel responsible for cleaning and disinfecting reusable patient care equipment if an application is only needed once every 24 hours. In addition, this persistent decontamination technology may reduce or eliminate the problem of recontamination and minimize the role of contaminated environmental surfaces and equipment in transmitting healthcare pathogens.

References

  1. In situ evaluation of a persistent disinfectant provides continuous decontamination within the clinical environment. Michael G. Schmidt PhD *, Sarah E. Fairey BS, Hubert H. Attaway MS, MBA Department of Microbiology and Immunology, Medical University of South Carolina, Charleston, SC. American Journal of Infection Control 47 (2019) 732−734.
  2. Antimicrobial activity of a continuously active disinfectant against healthcare pathogens; William A. Rutala PhD, MPH et al, Infection Control & Hospital Epidemiology (2019), 1–3, doi:10.1017/ice.2019.260.

Author

Amanda Thornton RN, MSN, CIC, VA-BC
amanda Clinical Science Liaison, PDI West Region

Profile

Amanda has been in nursing for the past 25 years.  She spent nine years as a direct care nurse in many clinical settings. In 2005 she entered into infection control and prevention, where she found a passion for all things related to preventing avoidable HAI’s. She became certified in infection control through the CBIC, and worked as a front line Infection Preventionist until she advanced to be the Chief Clinical Officer of a 68 bed LTAC in Denver Co.

Amanda is also a clinical educator and was an instructor for the LPN and C.N.A. programs through the Unitah Basin Applied Technology College, where she taught the Med-surg, pharmacology, C.N.A. and infection control courses for students.

Amanda is currently a Clinical Science Liaison supporting the West Region.

Contact

Phone: 720-849-1168
Company Website: Pdihc.com
Email: Amanda.Thornton@pdihc.com

Hobbies

Resin geode and fluid Art
Lit RPG fiction
Colorado camping and hiking
Scrapbooking

Education

Master of Science in Nursing – Emphasis in Infection Control and Epidemiology
American Sentinel University, Aurora, Colorado

Bachelor of Science in Nursing, BSN
University of Northern Colorado, Greeley, Colorado

Certification
Certification Board of Infection Control (CBIC) – CIC
Certification Association for Vascular Access – VA – BC

Why I love what I do

I love being a nurse and caring for people.  When I recognized that I could touch many more lives by preventing infections through becoming a Certified Infection Preventionist, I jumped at the chance.  Seeing the impact I can have with patients, families, and staff through sharing my knowledge of infection control has been a highlight of my career. Joining the team at PDI has allowed me to expand my reach even further. At the end of my week, I am so amazed that I have such an awesome opportunity to help protect patients and loved ones from infections through the use of our products, and the proven science behind them!

Areas of Expertise

Infection control and prevention
Environmental disinfection
Ventilator Care
Vascular Access
Long term care
Long term acute care
Dementia care
Infection surveillance technology
Education
Leadership

More about Amanda Thornton Less about Amanda Thornton